topic Error occurred while connecting to the interface hardware or target in S32K

Error occurred while connecting to the interface hardware or target

Anilpatil_SasvaAuto — Fri, 10 May 2024 12:58:24 GMT

Hello Team,

I am using S32K144EVB and tried to run a sample application(hello_world_s32k118) with PE micro debugger (built-in OpenSDA) to check if the EVB is fine. Things were not going well and got errors as below.

Please provide the solution ASAP

Re: Error occurred while connecting to the interface hardware or target

Robin_Shen — Mon, 13 May 2024 02:52:37 GMT

Since you are using S32K144EVB, why do you want to run a sample application(hello_world_s32k118)? Please run the S32K144 example in the future.

I happened to be discussing a similar issue with another customer, please refer to: S32K144 EVB Red led 계속 on 상태입니다.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Error occurred while connecting to the interface hardware or target

Anilpatil_SasvaAuto — Mon, 13 May 2024 05:17:23 GMT

Sorry, it's a copy mistake. I have run the S32K144 example.

Re: Error occurred while connecting to the interface hardware or target

Robin_Shen — Mon, 13 May 2024 08:15:31 GMT

Which example codes do you loaded into the device? Any for CSEc?
Did you secure the device?(FSEC SEC=secured )

Doesn't P&E Recovery Utility halt MCU? Please tell me what problem occurred during the operation.

Re: Error occurred while connecting to the interface hardware or target

Anilpatil_SasvaAuto — Mon, 20 May 2024 05:25:44 GMT

Hello World code

Re: Error occurred while connecting to the interface hardware or target

Robin_Shen — Mon, 20 May 2024 05:45:10 GMT

Have you already referred to that link?
Please tell me which step does not meet expectations.
If you don't tell me in detail, I won't be able to help you solve this problem.

Re: Error occurred while connecting to the interface hardware or target

Anilpatil_SasvaAuto — Mon, 20 May 2024 06:15:47 GMT

It is working now, the issue is with the power supply. need to change J107 for USB supply
Thanks for the support.

Re: Error occurred while connecting to the interface hardware or target

Anilpatil_SasvaAuto — Wed, 19 Jun 2024 10:20:16 GMT