topic 64 pins' S32K144 use PE enter Default in S32K

64 pins' S32K144 use PE enter Default

baotingkai — Mon, 29 Oct 2018 04:10:48 GMT

Dear，all

when I USE 64 pins' S32K144 ,after change SDK & Package followed HOWTO: Change the CPU Derivative in an SDK-Based Application Project & How to change package on S32DS Processor Expert two documents.We enter default when the program runs to PINS_DRV_Init() , I hope somebody helps me.

CLOCK_SYS_Init(g_clockManConfigsArr, CLOCK_MANAGER_CONFIG_CNT, g_clockManCallbacksArr, CLOCK_MANAGER_CALLBACK_CNT);

CLOCK_SYS_UpdateConfiguration(0U, CLOCK_MANAGER_POLICY_FORCIBLE);

PINS_DRV_Init(NUM_OF_CONFIGURED_PINS, g_pin_mux_InitConfigArr);

raresvasile — Mon, 29 Oct 2018 13:25:30 GMT

Hi,

Can you give more details on which pins are configured and what clock sources are enabled?

Thank you,

Rares

baotingkai — Tue, 30 Oct 2018 02:52:00 GMT

Hi,Rares

PINs & clock source are the default configuration.

Executing the red marked program，program jump to b DefaultISR

lpblueice — Thu, 29 Nov 2018 13:27:21 GMT

Hi Tingkai,

Have you resolved this problem? Thanks!

raresvasile — Mon, 03 Dec 2018 14:43:25 GMT

Hi,

I was not able to reproduce the issue. Can you send me a simple project which I can use to reproduce it?

Also, what SDK version are you using?

Thank you,

Rares

jxl — Wed, 03 Jul 2019 05:58:09 GMT

Hi, Bao!

Have u solved this problem? I'v encountered the same problem, if u have solved this problem, can u kindly share the solution? Thanks a lot!

thulzh — Sun, 19 Sep 2021 15:44:33 GMT

Hi, I have met the same problem, how to solve it?