Reset Reason: 1. Core Lock up Reset 2. ECC Memory error

Shivanee — Wed, 17 Apr 2024 05:49:25 GMT

Hi, I want to configure and test following reset reason 1. Core lockup error 2. Memory ECC error. I am using RTD driver for S32K312 controller and S32DS configurator to configure MCAL layer. Can you please let me know the configuration and test scenario to test this reset reasons.

Thank you.

Re: Reset Reason: 1. Core Lock up Reset 2. ECC Memory error

Robin_Shen — Mon, 22 Apr 2024 06:50:23 GMT

I'm not sure which S32K3 RTD version you are using. I am using S32K3 RTD 4.0.0 and I did not find Core lockup error or Memory ECC error.

Take MCU_HSE_BOOT_RST_RESET as an example, /**< @brief HSE_B boot reset. RGM_FES[F_FR20]. */
F_FR20 here refers to bit 20[HSE_BOOT_RST] of Functional/External Reset Status Register (FES).

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

S32KのトピックRe: Reset Reason: 1. Core Lock up Reset 2. ECC Memory error

Reset Reason: 1. Core Lock up Reset 2. ECC Memory error

Re: Reset Reason: 1. Core Lock up Reset 2. ECC Memory error