S32Kのトピック回复： S32K314 app jump to bootloader question

S32K314 app jump to bootloader question

Faith-Herio — Tue, 27 Feb 2024 02:38:02 GMT

hellow,I encountered a rather tricky problem. I am using BootLoader+APP mode on S32K314. The same code works fine when the BootLoader jumps to the APP, but it triggers a hard fault when the app jumps back to the BootLoader. During debugging, I found that there was an error in setting up the stack. I can't think of a good solution for this issue and would like to ask if anyone has any suggestions?

The code and the values of the variables look like this:

addr =0x00400000

static void (*jump_to_bootloader)(void);

static uint32_t stack_pointer;

uint32_t appEntry, appStack;

appStack = *(uint32_t *)(addr + 4096);

appEntry = *(uint32_t *)(addr + 4096 + 4);

jump_to_bootloader = (void (*)(void))appEntry;

stack_pointer = appStack;

S32_SCB->VTOR = (uint32_t)addr;

__asm volatile("MSR msp, %0\n" : : "r"(stack_pointer) : "sp");

__asm volatile("MSR psp, %0\n" : : "r"(stack_pointer) : "sp");

jump_to_bootloader();

FaithHerio_0-1709001404912.png

FaithHerio_1-1709001446787.png

回复： S32K314 app jump to bootloader question

Faith-Herio — Thu, 29 Feb 2024 08:34:32 GMT

已解决

回复： S32K314 app jump to bootloader question

shuaige — Wed, 27 Mar 2024 12:57:02 GMT

hello ，can you teach me how to address this question？Thank you？Why not jump?

回复： S32K314 app jump to bootloader question

Faith-Herio — Mon, 13 Jan 2025 03:44:05 GMT

Note to check if the RTOS is used. If RTOS is used, pay attention to the usage of the MSP and PSP registers before jumping. If the boot loader does not apply RTOS, you need to change your stack usage to the MSP register. Similarly, if the RTOS is used in the APP or BOOT, you need to change your main stack to the PSP before jumping.

Solution回复： S32K314 app jump to bootloader question

Faith-Herio — Mon, 13 Jan 2025 03:45:19 GMT