topic Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA in S32K

S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Tue, 20 Feb 2024 16:31:19 GMT

I am facing flashin issue when try to program through OPEN SDA

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

Senlent — Wed, 21 Feb 2024 06:37:38 GMT

Hi@nkarthik

could you please record the steps when you programming, so that i could help you troubleshooting the possible causes.

take a look at this post which may useful to you.

https://community.nxp.com/t5/S32-Design-Studio/Cannot-run-program-quot-gdb-quot-Launching-failed/m-p/802139

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Wed, 21 Feb 2024 16:26:04 GMT

Hi Senlent,

Please find attached document related to steps.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

Senlent — Thu, 22 Feb 2024 01:52:25 GMT

Hi@nkarthik

please select a right target device in the highlight button and then try again.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Thu, 22 Feb 2024 16:43:43 GMT

Hi,

I am not able to select device and port

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

Senlent — Fri, 23 Feb 2024 02:15:09 GMT

Hi@nkarthik

please check whether the plug-in has been installed correctly.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Thu, 29 Feb 2024 09:46:10 GMT

Already installed PE-micro-Debug and working.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Thu, 29 Feb 2024 09:48:02 GMT

PE-Debug is installed and still the issue is not resolved

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

Senlent — Thu, 29 Feb 2024 10:01:21 GMT

Hi@nkarthik

If your problem is not solved, please still record the steps you took, otherwise I will not be able to help you analyze and solve it.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Mon, 04 Mar 2024 15:12:18 GMT

hi Nxp Team,

Here is the flashing issue snapshot and EVL Board (Power connected).please help to resolve this issue

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

Senlent — Tue, 05 Mar 2024 03:19:30 GMT

Hi@nkarthik

Let me double check it with you that you already can select target device?

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Tue, 12 Mar 2024 15:50:57 GMT

Target selected and Port is not detected

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

Senlent — Wed, 13 Mar 2024 01:57:24 GMT

Hi@nkarthik

I sent you a document via private message.

This document records the complete process of installing the development environment.

If this document still cannot solve your problem, then I don’t know how to solve your problem.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Sat, 23 Mar 2024 16:27:44 GMT

Hi Senlent,

Thank you for the extended support. I am able to flash now.

Root cause : Antivirus block the NXP-S32Ds SW .dll.

Re: S32 Design Studio 3.5 +Flashing issue when try to program through OPEN SDA

nkarthik — Sat, 23 Mar 2024 16:31:59 GMT

Hi Nxp team,

Can you please add Guideline doc's or checklist in the SW installation about the list of .dll needs to be whitelisted in the Antivirus.

Thanks Regards

Karthik.N