S32KのトピックRe: Regarding NXP32k148

Regarding NXP32k148

musthafa — Wed, 14 Feb 2024 10:31:29 GMT

How to flash CAN message in NXP S32k148 board.

by default, is there is any shell in the nxps32k148 board.

Re: Regarding NXP32k148

VaneB — Wed, 14 Feb 2024 18:53:20 GMT

Check the example code examples provided in the S32K1xx Series Cookbook. It will be a good reference for your project. We also provide examples in the software packages if you use any of our available software (RTD or SDK).

Please clarify what you mean by "there is any shell in the nxps32k148 board".

B.R.

VaneB

Re: Regarding NXP32k148

musthafa — Thu, 15 Feb 2024 07:13:58 GMT

"There is any shell in the nxps32k148 board" - I'm new to the embedded. I searched lot of site about linux os using in the microcontroller. so, by default any linux os(busy box) installed in the MCU.

Re: Regarding NXP32k148

VaneB — Thu, 15 Feb 2024 21:28:15 GMT

Hi @musthafa

S32K1 does not have support for this topic. For other MCUs, there are options like uCLinux by EmCraft. Check the following link. It might be related to what you are looking for.

https://www.emcraft.com/#uclinux-bsps

Re: Regarding NXP32k148

musthafa — Fri, 16 Feb 2024 10:07:43 GMT

@VaneB
Thanks