S32KのトピックLaunching MCSPTEAK116_BLDC_6Step_Debug Failed

Launching MCSPTEAK116_BLDC_6Step_Debug Failed

Chen2002 — Tue, 06 Feb 2024 08:00:57 GMT

I am trying to run the MCSPTEAK116_BLDC_6Step example on the S32K116 EVK and MOTOR-GD daughterboard. I was able to build the code but fail to debug. However, I can compile and debug when I use the software's routines, such as Hellow World.

My configuration is shown below.

I tried the method described in the link ,but it didn't work.

Internal error during Start GDB Semihosting Job on... - NXP Community

What should I do to solve this question? Thank you very much!

Re: Launching MCSPTEAK116_BLDC_6Step_Debug Failed

lukaszadrapa — Thu, 08 Feb 2024 05:49:53 GMT

Hi @Chen2002

could you share the project, so I can test it on my side? Which S32DS version is used?

Regards,

Lukas

Re: Launching MCSPTEAK116_BLDC_6Step_Debug Failed

Chen2002 — Thu, 08 Feb 2024 06:39:05 GMT

Thanks for your reply!

The software I use is S32 Design Studio for ARM Version 2.2. And I downloaded the Development Kit - Application Software according to Get Started with the MCSPTE1AK116.

I followed this tutorial step by step, but unfortunately I didn't suceed. I wonder if there is something incompatible with the project(MCSPTE1AK116_BLDC_6Step), because it was released in 2022.

Thank you!

Chen

Re: Launching MCSPTEAK116_BLDC_6Step_Debug Failed

lukaszadrapa — Thu, 08 Feb 2024 11:11:22 GMT

Well, your project works on my side. I also tried to create own project from the original MCSPTEAK116_BLDC_6Step project and it's working too.

It seems to be a problem with the debugger. Please take a look at following threads, it could help:

https://community.nxp.com/t5/S32K/Internal-error-during-Start-GDB-Semihosting-Job-on-S32DS/td-p/1730333

https://community.nxp.com/t5/S32K/Unable-to-Debug-project-using-PEMicro-Debugger/td-p/1730488

Regards,

Lukas