S32K中的主题 S32K3xx: Error in S32DS Platform IDE while configuring the project

S32K3xx: Error in S32DS Platform IDE while configuring the project

tecprasant — Tue, 30 Jan 2024 09:13:47 GMT

Hi,

I am using S32 Design Studio Platform IDE 3.5 [Build id: 231219 (Update 9)].

I have created a project on my laptop and I am able to build and flash my project on the S32K3-EVB successfully.

The problem is that when the same project is imported on my colleagues laptop or another laptop then the project does not build. I am unable to configure the pins / drivers on the imported project.

In the configuration I see the Error: Processor "" detected in the NXP GCC 10.2 for Arm 32 bit Bare-Metal project does not match the currently selected "S32K344". The target processor is not supported....

Below is the error image :

S32DS Error Message

We have checked that there are no hard linkages in the code and compared the files on the 2 laptops, but we cannot figure out the difference in the imported project. I have ensured that all relevant files are transferred to the other laptop.

Any inputs on this would be of help.

Thanks in advance.

Re: S32K3xx: Error in S32DS Platform IDE while configuring the project

jiri_kral — Wed, 31 Jan 2024 10:02:55 GMT

Hi,

is on the colleague's PC installed the same version of RTD?

Try to compare Extensions And Updates on both Machines:

Re: S32K3xx: Error in S32DS Platform IDE while configuring the project

tecprasant — Wed, 31 Jan 2024 15:11:10 GMT

Yes, the extensions and updates are same. The same version of the library is installed on both the machines.

Re: S32K3xx: Error in S32DS Platform IDE while configuring the project

tecprasant — Fri, 02 Feb 2024 12:46:05 GMT

I found the solution to this problem.

I had not included the ".settings/" directory when transferring the project to my colleagues system. I was under the impression that this directory should be excluded / ignored.

NXP has added an important file in this directory: ".settings/com.nxp.s32ds.cle.runtime.component.prefs".

This file must be included in the project while committing to version control or while transferring this file. When this file is included this error goes away.

There are other com.nxp.s32ds.*.prefs file in the same directory. I have included them as well - for avoiding any issues with the project in the future.