topic Re: Debug issue - EVB S32K116-Q048 in S32K

Debug issue - EVB S32K116-Q048

pawl — Mon, 08 Jan 2024 16:40:26 GMT

Hello,

I am trying to run eval board XS32K116EVB2Q048. I am not able to flash/debug it with S32 Design Studio for ARM Version 2.2. I based on Getting Started instruction.

Jumper settings:

J104 2-3

J107 2-3 (S32K11x powered by USB micro connector)

J10 2-3

J108, J15 1-2

Project setting:

Progress got stuck on 62%:

FreeMaster connection error:

Board appears as mass storage device in PC, but I haven’t seen toggle RGB (preloaded software).

Best regards,
Pawel

Re: Debug issue - EVB S32K116-Q048

Senlent — Tue, 09 Jan 2024 03:24:22 GMT

Hi@pawl

I followed your steps to try to reproduce your problem, but everything works fine on myside.

1.Can you try a few more times? This may be due to your PC.

2.Please make sure S32K116 has been programmed correctly "S32K116_EVB_JumpStart_Firmware"

S32K116_EVB_JumpStart_Firmware
What I need to tell you is that this routine is based on a very early version of hardware and software. It does not work perfectly with the new version of S32K116EVB, but I have tested it and at least the connection can work.

Re: Debug issue - EVB S32K116-Q048

pawl — Tue, 16 Jan 2024 13:51:17 GMT

It was related to Windows administrator rights. Debugger is working good now.

Re: Debug issue - EVB S32K116-Q048

reidefe — Thu, 14 Mar 2024 15:18:24 GMT

Please i am having the same issue with the same board. Not recognized on Freemaster, and s32ds for arm recognizes it as a different SKU but debugging is still impossible. Implemented the "S32K116_EVB_JumpStart_Firmware" update by copying the .srec file into the device USB folder.
Currently, all it does is make the LED light blink 8 times then a 2-second pause on repeat.