topic Re: PWM issue in S32K

PWM issue

Ayaz — Fri, 24 Nov 2023 09:11:47 GMT

I am using S32K344 to generate PWM via eMIOS and flexio using OPWMB?

i have some dough regrade to the formular for calculating the PWM frequency ?

PWM frequency = CORE_CLK / global prescaler / internal prescaler / (B1+1)

I am using this formular for Emios can i use it also for flexio?

Re: PWM issue

Robin_Shen — Mon, 27 Nov 2023 03:10:23 GMT

I don't think this formula for eMIOS can be used for Flexio_PWM. Have a look at Flexio_Pwm_Ip_Example_S32K344:

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: PWM issue

Ayaz — Mon, 27 Nov 2023 08:15:47 GMT

what is the formula for flexio_pwm ?

Re: PWM issue

Ayaz — Mon, 27 Nov 2023 08:33:57 GMT

first 1)

is the formular i am using for eMIOS correct ?

PWM frequency = CORE_CLK / global prescaler / internal prescaler / (period ticks+1) or shoud it be

PWM frequency = CORE_CLK / global prescaler / internal prescaler / (period ticks).

second 2) when i have for example period for 2400 ticks and i set duty cycle into 2400,100% duty cycle is not giving any output,but if i decrease the duty cycle only be one ticks then the period then it will gives an output of 98,7%.

my setup is

CORE_CLK=48MHz

global prescaler=1

internal prescaler=1

mcl

Re: PWM issue

Robin_Shen — Mon, 27 Nov 2023 08:44:43 GMT

FlexIO PWM frequency = AIPS_PLAT_CLK/ Clock prescaler / Period[ticks]=48MHz/1/200=240 kHz

Re: PWM issue

Robin_Shen — Mon, 27 Nov 2023 08:58:35 GMT

eMIOS PWM frequency has been discussed in S32K344 hardware PWM frequency, which is:

PWM frequency = CORE_CLK / global prescaler / internal prescaler / (B1+1)

Re: PWM issue

Ayaz — Mon, 27 Nov 2023 09:05:19 GMT

PWM frequency = CORE_CLK / global prescaler / internal prescaler / (B1+1)

under the example you send me this formular is for OPWFMB mode

does this formular applies on OPWMB mode also?

Re: PWM issue

Robin_Shen — Mon, 27 Nov 2023 09:13:17 GMT

Yes, I think it's the same.

Re: PWM issue

Ayaz — Mon, 27 Nov 2023 09:19:48 GMT

is it normal that if i apply 2399 ticks for period and i set the duty cycle 2399 to get 100% duty cycle ,is not giving my any output ,from the test i did ,the duty cycle most always be one ticks less the period to get 100% duty cycle ,it is for emios

Re: PWM issue

Robin_Shen — Wed, 06 Dec 2023 09:06:22 GMT

Note Clock prescaler(Internal Prescaler) Will only have an effect in OPWFMB and OPMCB modes.(Shown in S32 Configuration Tool). If OPWMB mode is selected, only global prescaler(Master Bus Prescaler) is active by using S32CT.

Re: PWM issue

ESAKKI_MBD — Wed, 06 Mar 2024 09:41:01 GMT

in this formula I can't be able to understand what is B1?

Re: PWM issue

ESAKKI_MBD — Mon, 06 May 2024 08:11:57 GMT

I have a issue with OPWFMB mode for variable frequency & variable duty cycle. can you help me with this mode with an example?

I am encountering with the OPWFMB mode for variable frequency and duty cycle. can you help me with examples in understanding and troubleshooting such complexities.

Your expertise in this matter would greatly contribute to resolving the issue efficiently.

Thank you in advance for your attention to this matter. I look forward to your guidance and insights.