topic Re: s32k3 sdhc/sdio read data uncorrect in S32K

s32k3 sdhc/sdio read data uncorrect

jiangyaqiang — Thu, 19 Oct 2023 12:16:25 GMT

HI anyone,

I got a problem when using s32k358 usdhc/sdio to config wifi module 88w8987.

After download FW success, it need to read some data from the module, but it will always got uncorrect data at somewhere, but there is no error during transfer(no CRC or DMA error).

I have disabled D-cache and I-cache, and do not use DMA, the no help.

And when the data uncorrect, it always uncorrect in first 4 bytes, as bellow picture:

Could anyone give me a hand ?

　　Thanks very much.

Re: s32k3 sdhc/sdio read data uncorrect

Nhi_Nguyen — Wed, 15 Nov 2023 09:38:53 GMT

Hi @jiangyaqiang ,

Did you try to put data buffer into the non-cache memory? like this:

Best regards,

Nhi

Re: s32k3 sdhc/sdio read data uncorrect

jiangyaqiang — Wed, 22 Nov 2023 08:18:12 GMT

HI：

Thanks for reply.

I have fixed the problem, it's because of hardware not good, I need to turn low the frequency , but not too low , it's ok for 1M , but fail at 400K.

but I have another problem when use DMA and cache, it will cache in function:

hwAcc_ArmCoreMx_DataCacheCleanByAddr(
false,
(uint32_t)(content->data->txData == NULL ? content->data->rxData : content->data->txData),
(content->data->blockSize) * (content->data->blockCount));

it will fail in the while of the function

hwAcc_ArmCoreMx_DataCacheCleanByAddr

{

while(tmpAddr < endAddr)
{
*pDataCacheCleanByAddr = tmpAddr;
MCAL_DATA_SYNC_BARRIER();
MCAL_INSTRUCTION_SYNC_BARRIER();
tmpAddr = tmpAddr + cacheLineSize; /* Clean 1 line at a time. */
}

}

do you have any idea about it ?

Re: s32k3 sdhc/sdio read data uncorrect

Nhi_Nguyen — Thu, 07 Dec 2023 06:35:42 GMT

Hi jiangyaqiang,

Could please provide detail how it fail in while?

Best regards,

Nhi

Re: s32k3 sdhc/sdio read data uncorrect

jiangyaqiang — Thu, 07 Dec 2023 06:50:00 GMT

HI :

it will trigger "HardFault" event.

Re: s32k3 sdhc/sdio read data uncorrect

Nhi_Nguyen — Thu, 07 Dec 2023 07:33:10 GMT

Hi jiangyaqiang,

Can you send me your project or configuration?

Best regards,

Nhi

Re: s32k3 sdhc/sdio read data uncorrect

jiangyaqiang — Thu, 07 Dec 2023 07:39:43 GMT

HI Nhi：

I'm using S32K3X8EVB , the code and config is from S32K3_SDHC_CD1_0_4_0_D2307_updatesite.zip example of "sdhc_wifi_S32K358"

Re: s32k3 sdhc/sdio read data uncorrect

Nhi_Nguyen — Wed, 27 Dec 2023 04:15:16 GMT

Hi @jiangyaqiang ,

I was attached an example for DMA and cache enabled. Please refer to it.

Best regards,

Nhi