topic Re: S32K144 Debugging issues in S32K

S32K144 Debugging issues

Niupitang — Tue, 31 Oct 2023 08:43:53 GMT

The jlink in my hand is damaged, so I have to use PEmicro Mutlllink FX to debug... After referring to a large number of posts, the following problems always occur when entering debugging：

The following is my debugging settings interface：

I hope someone can help solve this problem. The PE driver and hardware are normal. I have used it to debug MPC5748G. The wiring is also normal and the debugger yellow light lights up normally. TVCC has also been connected to the 5V of the development board.

Re: S32K144 Debugging issues

jiri_kral — Tue, 31 Oct 2023 10:19:38 GMT

Hi,

your Multilink FX debug probe is not recognized by system for some reason. Is the probe properly connected? Is visible in Windows Device manager?

Re: S32K144 Debugging issues

Niupitang — Wed, 01 Nov 2023 01:14:29 GMT

Of course, I also used this debugger when I debug other processors.

Re: S32K144 Debugging issues

Niupitang — Sat, 11 Nov 2023 03:46:07 GMT

请问有什么解决方法吗

Re: S32K144 Debugging issues

jiri_kral — Mon, 13 Nov 2023 11:29:49 GMT

Hi,

you can try re-install PE Micro drivers. With default install path is driver located in c:\NXP\S32DS.3.5\Drivers\ folder.

This issue is related to one particular S32K144 board or to all boards?