topic Re: DCD tool does not support selected processor in S32K

DCD tool does not support selected processor

GaryZhang1 — Thu, 02 Nov 2023 19:06:57 GMT

I try to compile an example project for S32K358, it says "DCD tool does not support selected processor. Select different tool."

Have I missed a tool setting or I do not need this DCD tool? the compile error says the *.h file can not be found.

Thanks

Gary

Re: DCD tool does not support selected processor

Robin_Shen — Fri, 03 Nov 2023 01:05:39 GMT

Hi Gary,

You don't need DCD tool. Please select other tool, for example: Peripherals tool and then click Update Code.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: DCD tool does not support selected processor

GaryZhang1 — Fri, 10 Nov 2023 18:15:33 GMT

Thank you, Robin, the issue was solved. I did not find "Mark Correct" button.

Re: DCD tool does not support selected processor

Robin_Shen — Mon, 13 Nov 2023 01:24:15 GMT

You are welcome! Please sign in and click ACCEPT AS SOLUTION.