topic hse fw Activation in S32K

hse fw Activation

youxi — Fri, 09 Jun 2023 11:09:32 GMT

hello:

I successfully installed the firmware, but when I sent the instruction to HSE, HSE did not return the data, please ask if the installed HSE FW still needs to be activated. If activation is required, how? Can you provide a section of the active code?

Re: hse fw Activation

petervlna — Tue, 13 Jun 2023 06:24:43 GMT

Hello,

Please rise the ticket at NXP.com

https://community.nxp.com/t5/HomeTest-Knowledge-Base/How-to-submit-a-new-question-for-NXP-Support/ta-p/1117058

Security sensitive questions are not discussed on public community.

No activation is required after install. Please refer to installation package documentation

HSE FW install for S32K3xx -

chapter 4.1.1. How to install HSE FW(FULL_MEM) within IVT

Best regards,

Peter

Re: hse fw Activation

youxi — Mon, 19 Jun 2023 01:18:13 GMT

hello：

Thanks for your support, I have successfully installed on it. The hse _ ab _ swap needs to be installed in both partitions, and the hse _ full _ mem does not