S32KのトピックCould not able to generate processor expert code

Could not able to generate processor expert code

KishanJPatel — Fri, 12 May 2023 12:20:03 GMT

Hello,

I am using S32K144EVB-Q100 board.
Create new project from example for freeRTOS.
But could not able to generate processor export code and build error.
Please check attached error messages for more clarification.

Re: Could not able to generate processor expert code

VaneB — Fri, 12 May 2023 20:04:24 GMT

Hi @KishanJPatel

Just to be sure, did you do the following steps to run the project?

File -> New S32DS Project From... and select freertos_s32k144. Then click on Finish.
The project should now be copied into your current workspace.
Project Explorer View in S32 DS and select the current project (freertos_s32k144). Then go to Project and click on Generate Processor Expert Code.
Select the configuration to be built FLASH (Debug_FLASH) or RAM (Debug_RAM).
Go to Run and select Debug Configurations.

B.R.

VaneB

Re: Could not able to generate processor expert code

KishanJPatel — Mon, 15 May 2023 05:31:28 GMT

I am using S32 design studio for ARM (version 2.2) IDE

And followed below steps:

Click on file-->new-->S32 DS Project From Example-->S32SDK S32K1xx.....-->S32K144-->demo_apps-->freertos_s32k144-->finish
Then go to Project and click on Generate Processor Expert Code

But it could not able to generate-code due to error (previous attachment).

I also observe one error on IDE launch, please check attachment for more details

Re: Could not able to generate processor expert code

KishanJPatel — Mon, 15 May 2023 06:46:48 GMT

Now, this issue resolved by following below steps:

Uninstall/remove apps(IDE)
Delete NXP->S32DS_ARM_v2.2 folder
Delete workspace folder

Then re-install IDE, and followed same steps to create a project from example

Now, its working fine