S32KのトピックRe: ADC project using MCAL

ADC project using MCAL

laofu — Thu, 16 Mar 2023 02:58:21 GMT

HI,@NXP

I try to build a ADC project triggered by pdb using s32ds with autosar mcal,whether just the mcal module ADC is needed,should the drivers module Adc_Ip and pdb_Adc_Ip is needed? thanks

Re: ADC project using MCAL

cuongnguyenphu — Mon, 20 Mar 2023 06:26:12 GMT

Hi,
If you added Adc in MCAL module, don't need to add PDB_Adc_Ip under Driver layer

Re: ADC project using MCAL

laofu — Mon, 20 Mar 2023 07:31:35 GMT

thinks for your replying,I want the pdb trigger by Lpit ,but in mcal ADC module,i can not configure the pdb to trigger by hardware,it seems that pdb can only triggered by software.My ultimate aim is just using mcal to configure a project that adc is triggered by pdb ,and pdb is triggered by Lpit.

Re: ADC project using MCAL

cuongnguyenphu — Mon, 20 Mar 2023 09:41:30 GMT

Can you give me the information of hardware target and RTD version you're using?

Re: ADC project using MCAL

laofu — Tue, 21 Mar 2023 01:15:07 GMT

Hi,

i use the s32k144,and RDT version is 1.0.1.

Re: ADC project using MCAL

cuongnguyenphu — Thu, 06 Apr 2023 11:42:04 GMT

Sorry for late response,
I created the example ADC trigger by LPIT in the attached file and the guidance to configure and implement for example. please look at these attachments

Re: ADC project using MCAL

laofu — Thu, 06 Apr 2023 01:26:29 GMT

HI,thanks.does the example project you provided is mistake? it seems about i2c. in addition,my RTD is 1.01and this example use RTD1.0.0, so i can not open it

Re: ADC project using MCAL

cuongnguyenphu — Thu, 06 Apr 2023 11:43:06 GMT

Sorry, I make mistake when upload the example
I re-attached the ADC project for K1 RTD 1.0.1