S32KのトピックTrace, Debug, Bist , S32K , Functional Reset

Trace, Debug, Bist , S32K , Functional Reset

Higgs_Boson — Tue, 14 Mar 2023 08:33:31 GMT

Hi, Teams,

We are using BIST in the s32k project, Since bist will cause functional reset after test done. And

1. we wonder how to use debug tool(e.g. trace32) to trace the software when s32k is performed a functional reset.

2. and, how to reinit s32k after functional reset .because I notice the ram is become "???" after the functional reset:

Thanks.

lukaszadrapa — Tue, 14 Mar 2023 15:13:43 GMT

You can use sys.attach command after any reset or after power-on to re-establish debug session without reset (copied from debugger_arm.pdf):

After functional/destructive reset, the device boots from normal reset vector as usual. Startup files then contains code which initializes the RAM.

Regards,

Lukas

Higgs_Boson — Wed, 15 Mar 2023 01:18:12 GMT

Hi,

A Functional Reset will cause RAM content loss? How does "Self Test Done Functional Reset" / "Functional Reset" means.

Thanks.

lukaszadrapa — Wed, 15 Mar 2023 16:13:40 GMT

generally, functional resets will keep SRAM data unchanged by hardware mechanism.
Destructive resets cannot guarantee the SRAM data integrity.

However, SRAM self test cannot keep the SRAM content. It's destructive operation.

Regards,

Lukas