S32KのトピックRe: FlexCAN in loopback test

FlexCAN in loopback test

arvindupadhyay — Mon, 29 Aug 2016 12:20:35 GMT

Hi Friends,

I am using S32K144, i want some sample code to test Flex CAN in loopback mode. I have written code but it is not working.

Regards,

Arvind

Re: FlexCAN in loopback test

lukaszadrapa — Tue, 30 Aug 2016 06:10:16 GMT

Hi Arvind,

see attached example. It is not loopback mode but it should help. Two FRDM boards are used.

Pushing SW2 on Tx board starts sending CAN message, then Rx board reply same message to Tx board.

You can configure project for Rx and Tx at line 41 in main.c.

Regards,

Lukas

Re: FlexCAN in loopback test

arvindupadhyay — Tue, 30 Aug 2016 09:48:38 GMT

Hi Lukas,

Thank you for reply, I am managed to configure example code as in loopback mode and its working fine.

Regards,

Arvind.

Re: FlexCAN in loopback test

swatimali — Fri, 09 Dec 2016 07:08:08 GMT

Hi,

I am beginner for CAN , can you please explain how should I use above attached code for CAN functionality on S32K144 Eval board ?. I have PCAN view tool how should I see data their.

Thanks & Regards,

Swati Mali

Re: FlexCAN in loopback test

dileepbalgi — Fri, 09 Dec 2016 10:54:34 GMT

Hello Arvind,

Can you please explain how you are able to configure the above example in loopback mode.It will be helpful if u attach the code with the reply.

Regards,

Dileep

Re: FlexCAN in loopback test

arvindupadhyay — Sun, 18 Dec 2016 07:04:28 GMT

Hi ,

Here is my sample code for LoopBack Test for FlexCAN.

GitHub - arvind747/S32K144_FlexCAN_LoopBackTest: Example code of FlexCAN loopback test

Regards,

Arvind