S32KのトピックRe: Debug problem

Debug problem

Hermit — Mon, 30 Jan 2023 12:43:11 GMT

Dear Team,

I want to debug the project on S32K342. However, some errors appeared. I attached the screenshot. And the debugger I used is PE micro multilink.

Re: Debug problem

VaneB — Mon, 30 Jan 2023 21:19:32 GMT

Hi @Hermit

To confirm, when developing an Arm® circuit board, it is recommended to use a standard debug signal arrangement to make a connection to the debugger easier, as it is shown in the below image:

The connections were made in this way. If not, could you share how you have the debugger connection?

B.R.

VaneB

Re: Debug problem

Hermit — Tue, 31 Jan 2023 01:32:15 GMT

Hi VaneB,

I have ensured that our connections are similarly to what you offered. Is there any other configuration I should perform to make it successful? For example,the speed?

Regards,

Hermit

Re: Debug problem

Hermit — Tue, 31 Jan 2023 02:26:12 GMT

Hi VaneB,

The error I metioned before has been resolved by adjusting the speed. However, there are some new errors appearing. I attached the screenshots below. Hope your response.

Best Regards,

Hermit

Re: Debug problem

VaneB — Tue, 31 Jan 2023 22:04:59 GMT

Hi @Hermit

Could you share with me your hardware connections?

Re: Debug problem

Hermit — Thu, 02 Feb 2023 07:14:41 GMT

Hi VaneB

The problem has been resolved. Thanks.

Best regards,

Hermit