S32KのトピックIDD in VLPS https://community.nxp.com/t5/S32K/IDD-in-VLPS/m-p/740409#M1960 <HTML><HEAD></HEAD><BODY><P>Hi,&nbsp;&nbsp; I have a question about S32K144 current consumption in VLPS mode.&nbsp;&nbsp;&nbsp; I measured about 50 uA on S32k144 Eval board&nbsp; using SDK example power_mode_switch_s32k144.&nbsp; However current&nbsp; is about 600 uA when measured with our application on the same Eval board.&nbsp;&nbsp;&nbsp; The NXP application note AN5425 mentions that all modules( except LPTMR, SIRC clock..)&nbsp;get turned off in VLPS mode. I assume&nbsp;the &nbsp;automatic turn off should apply to both the SDK Example and our application. What could be causing the extra current( about 500uA)&nbsp;in &nbsp;VLPS mode with our application?</P></BODY></HTML> Wed, 01 Nov 2017 13:41:39 GMT sreenivasuluvak 2017-11-01T13:41:39Z IDD in VLPS https://community.nxp.com/t5/S32K/IDD-in-VLPS/m-p/740409#M1960 <HTML><HEAD></HEAD><BODY><P>Hi,&nbsp;&nbsp; I have a question about S32K144 current consumption in VLPS mode.&nbsp;&nbsp;&nbsp; I measured about 50 uA on S32k144 Eval board&nbsp; using SDK example power_mode_switch_s32k144.&nbsp; However current&nbsp; is about 600 uA when measured with our application on the same Eval board.&nbsp;&nbsp;&nbsp; The NXP application note AN5425 mentions that all modules( except LPTMR, SIRC clock..)&nbsp;get turned off in VLPS mode. I assume&nbsp;the &nbsp;automatic turn off should apply to both the SDK Example and our application. What could be causing the extra current( about 500uA)&nbsp;in &nbsp;VLPS mode with our application?</P></BODY></HTML> Wed, 01 Nov 2017 13:41:39 GMT https://community.nxp.com/t5/S32K/IDD-in-VLPS/m-p/740409#M1960 sreenivasuluvak 2017-11-01T13:41:39Z