S32KのトピックRe: Flashing After EB Tresos

Flashing After EB Tresos

lb28 — Thu, 28 Jul 2022 19:19:30 GMT

Hello,

I've configured modules in EB Tresos and have generated a project for S32K14W-Q064 Evaluation Board

I tried following these following steps, however I am having no luck.

Can I somehow use S32 DS to generate a .elf file and flash it onto my board?

Re: Flashing After EB Tresos

namnguyenviet — Mon, 01 Aug 2022 03:36:53 GMT

Hello @lb28,

What was the error you have been facing with during your attempt with the example? I would suggest that instead of using EB Tresos as a code generator, you can directly use S32DS: you need to install the S32K RTD package for S32DS, try out an example project in S32DS then flash the elf file into your board.

Best Regards,

Nam

Re: Flashing After EB Tresos

lb28 — Mon, 01 Aug 2022 13:47:55 GMT

Hello,

Thank you for getting back to me.

I've tried it with the RTD Package for S32DS and I've gotten it to work.

However, I would like to generate the code from EB Tresos itself.

The error comes in the Windows Command Prompt when I try to enter in the command listed in section 3.2 and 3.3 of the screenshot I provided. It says the command has not been found.

Regards,

Re: Flashing After EB Tresos

namnguyenviet — Tue, 02 Aug 2022 02:12:01 GMT

Hello @lb28,

Could you share the error log (some snapshots should be fine)? I would assume that there were some issues with the paths to some programs e.g. GCC or make GNU.

Best Regards,

Nam

Re: Flashing After EB Tresos

lb28 — Tue, 02 Aug 2022 16:09:48 GMT

Hello,

I would like to generate the .elf file from the MCAL in EB Tresos and flash it onto the board.

Error:

Error in the Windows Command Prompt.

Best Regards,

Re: Flashing After EB Tresos

namnguyenviet — Wed, 03 Aug 2022 10:59:14 GMT

Hello @lb28,

It seems like you haven't installed any GNU make yet. You can install the GNU make here: https://www.gnu.org/software/make/ or install Cygwin https://www.cygwin.com/ then add the make.exe directory to your PATH variable.

Best Regards,

Nam

Re: Flashing After EB Tresos

lb28 — Wed, 03 Aug 2022 15:54:07 GMT

The 'Path' variable in what application?

Re: Flashing After EB Tresos

namnguyenviet — Thu, 04 Aug 2022 02:21:48 GMT

Sorry I didn't make it clear. It's the PATH in environment variables. Something like:

Here is a link that you can refer to:

https://docs.microsoft.com/en-us/previous-versions/office/developer/sharepoint-2010/ee537574(v=office.14)

Best Regards,

Nam

Re: Flashing After EB Tresos

lb28 — Thu, 04 Aug 2022 18:29:08 GMT

Hello,

This helped a lot. Thank you!

I am now getting this error.

Re: Flashing After EB Tresos

namnguyenviet — Fri, 05 Aug 2022 02:55:58 GMT

Sometimes the slash in the path might be the problem. Usually backslash is used path to a local file on a windows machine, while slash is a path to a web resource or file located on a UNIX based machine (includes Macs, Linux).

Try to change the slash in project_parameters.mk and see whether your issue can be fixed.

Best Regards,

Nam

Re: Flashing After EB Tresos

lb28 — Fri, 05 Aug 2022 18:17:21 GMT

Hello,

I'm getting the same error again.

Here's my project_parameters.mk file.

Re: Flashing After EB Tresos

namnguyenviet — Mon, 08 Aug 2022 03:18:46 GMT

Hello @lb28,

Is it indeed that the path to the Tresos plugin directory (where you've installed the RTD package) is C:\EB\tresos\plugin?

Best Regards,

Nam

Re: Flashing After EB Tresos

lb28 — Mon, 08 Aug 2022 15:33:08 GMT

Ahhh,

I updated the path, thank you