topic Rappid tool for S32K144 in S32K

Rappid tool for S32K144

ambarishhundeka — Tue, 06 Feb 2018 07:31:25 GMT

Hi Nxp Team,

I have gone through the user manual of RAPPID tool and fallowed the below steps

1. Drag and drop the RBF file o the Evaluvation board

2.reset the EVAL board(connected the S32K144 Eval board with USB)

3. open the Rappid tool

4.load the rbl file (given in the example project of S32K_bootloader ,edited the path in the rbl file)

5. tool updated the all the configuration details and click on the "start the bootloader"

but it is not programmed , it is showing error "loss communication with CCP MCU, please cycle power and try again" and "operation has timed out".

I have tried with reset the controller and tried , but still getting same error.

for the application download also, manually i have set the configuration details and and disable the "BAM status" , tried to flash the Timer_test.hex file ,still it is showing same error.

find the attached errors images and please let me know the solution.

Regards,

Ambarish

Re: Rappid tool for S32K144

stanish — Tue, 06 Feb 2018 15:20:45 GMT

Hello,

I'd recommend you to generate srecord file image instead of intel Hex.

RAppID bootloader supports just s19 record (srec) file format.

Hope it helps.

Stan

Re: Rappid tool for S32K144

ambarishhundeka — Wed, 07 Feb 2018 04:20:29 GMT

Hello Stanish,

Thank you for your immediate response.

I have tried with S19 file also , still getting same error.

do I need to changes any settings in eval board(jumper connection change)?

I fallowed the steps explained in the forum by Jiri.Kral.

link is here :

https://community.nxp.com/thread/464653.

even for example code , getting the same error.

for the application flashing :

we can manually set the port configuration , disable the BAM , and tick the "erase and program" and start the bootloader.

is this correct

Thank you in advance for your help.

Regards,

Ambarish

Re: Rappid tool for S32K144

marcopunzi — Mon, 09 Jul 2018 07:28:59 GMT

Hello Ambarish,

Any solutions? I have your same problem.

Regards,

Marco

Re: Rappid tool for S32K144

ambarishhundeka — Mon, 09 Jul 2018 08:57:00 GMT

Hello,

please try with other rbf file.

I forget the link. I can send you the rdf file if you want.

Regards,

Ambarish

Re: Rappid tool for S32K144

marcopunzi — Mon, 09 Jul 2018 09:13:36 GMT

It would be great!

Which version of the RAppID have you used with it?

Thank you in advance Ambarish!

Regards,

Marco

Re: Rappid tool for S32K144

danielbernert — Wed, 09 Jan 2019 13:47:34 GMT

Hi,

Could you provide me this file also? I have the same Problem.

Thank you.

Greetings

Re: Rappid tool for S32K144

rathi_tg — Mon, 03 May 2021 03:04:59 GMT

@marcopunzi

Hello is your Boot loading working?

I always get a CPP Error

Regards

Gopal Rathi

Re: Rappid tool for S32K144

nishalemos — Wed, 12 May 2021 03:26:27 GMT

@ambarishhundeka

I am even facing the same issue.

If you have resolved it could you please guide me.

I have uploaded the RBF file provided in MATLAB toolbox for UART0 CAN0.(with S32k144)

Baud Rate :115200.

But I always get Loss of Communication CPP Error.

Regards

Nisha Lemos