https://community.nxp.com/t5/S32K/Execute-code-on-startup/m-p/1486509#M16253 <P><A href="mailto:Hi@B32bx" target="_blank">Hi@B32bX</A></P> <P>It looks like you are downloading the code to RAM instead of flash, you can try downloading the code to the flash area.</P> <P>You can refer to the attachment.</P> <P>BR!</P> Fri, 08 Jul 2022 02:29:44 GMT Senlent 2022-07-08T02:29:44Z https://community.nxp.com/t5/S32K/Execute-code-on-startup/m-p/1486231#M16250 <P>I programmed a few ports on my microcontroller to output a PWM signal. But when I turn my microcontroller off and on again it isn't executing my PWM code. I need to reprogram it again on every startup.</P><P>&nbsp;</P><P>I want the microcontroller to automatically execute my written code on startup. How can this be done?</P><P>&nbsp;</P><P>I am using the S32 Design Studio IDE and&nbsp;S32K118 microcontroller family.</P> Thu, 07 Jul 2022 12:53:47 GMT https://community.nxp.com/t5/S32K/Execute-code-on-startup/m-p/1486231#M16250 B32bX 2022-07-07T12:53:47Z https://community.nxp.com/t5/S32K/Execute-code-on-startup/m-p/1486509#M16253 <P><A href="mailto:Hi@B32bx" target="_blank">Hi@B32bX</A></P> <P>It looks like you are downloading the code to RAM instead of flash, you can try downloading the code to the flash area.</P> <P>You can refer to the attachment.</P> <P>BR!</P> Fri, 08 Jul 2022 02:29:44 GMT https://community.nxp.com/t5/S32K/Execute-code-on-startup/m-p/1486509#M16253 Senlent 2022-07-08T02:29:44Z