S32KのトピックInvalid project path: Include path not found (\include).

Invalid project path: Include path not found (\include).

KeepGoing — Wed, 23 Mar 2022 09:16:16 GMT

S32K142

MCSXTE2BK142_PMSM_FOC_1Sh

I have tried many methods, but I still can't solve the problem of path. I hope I can get help. Thank you very much

Senlent — Thu, 24 Mar 2022 02:00:10 GMT

please read the release note:

SW Requirements:
IDE: S32DS for ARM v2018.R1
SDK: S32K1xx SDK RTM 3.0.0
AMMCLib: S32K14x_AMMCLIB_v1.1.15
FreeMASTER(MCAT): v2.5 or later

and I made a test on S32DS for ARM v2018.R1 ,which works fine on my side.

BR!

Jim,

KeepGoing — Thu, 24 Mar 2022 02:32:20 GMT

Thank you very much for your answer. I solved a path problem by modifying debug - > debug ram.

Now I'm working on it

Warnings：The launch configuration

MCSXTE2BK142_ PMSM_ FOC_ 2Sh_ Debug_ Lauterbach. launch missing specification of a launch type

As shown in the figure

Finally, I would like to ask you whether my operation meets the specifications and is correct.

KeepGoing — Thu, 24 Mar 2022 02:38:34 GMT

Senlent — Thu, 24 Mar 2022 03:19:26 GMT

You can download the program and test whether the motor development kit is working properly.

and I don't have such hardware, so i can't test it for you.

KeepGoing — Thu, 24 Mar 2022 03:52:45 GMT

Yes,When I debug, I am prompted that the register reading fails. I don't know how to solve it. I hope I can get your help. Thank you.

Senlent — Thu, 24 Mar 2022 05:47:53 GMT

please install IDE: S32DS for ARM v2018.R1 & SDK: S32K1xx SDK RTM 3.0.0,then try again,

as i said above, i don't have the motor kits,so can not test it for you