topic Re: Remove s32K146 variant handle from a module in S32K

Remove s32K146 variant handle from a module

shubham_prajapati — Mon, 10 Jan 2022 06:44:51 GMT

Hello,

Currently I have 3 variants in project. For the MCU module.

Previously I was maintaining three configuration files (eg. MCU_Variant1_PBcfg, MCU_Variant2_PBcfg & MCU_Variant3_PBcfg). This was done by adding variant criterion option shown below:

Now I want to have just one configuration file (MCU_PBcfg) common for all the variants. To do this I have removed the variant option from the MCU module parameter as shown:

But I am getting the below errors. Can u please guide on this?

Regards

Shubham

Re: Remove s32K146 variant handle from a module

namnguyenviet — Fri, 14 Jan 2022 07:07:44 GMT

Hello @shubham_prajapati,

If you want to keep only one variant, then you can remove unused post-build variant ref:

However, my understanding is you want to remove the whole variant concept (as a result the configuration file name will not contain the variant name, e.g. Mcu_PBCfg.c instead of Mcu_PBCfg_VS_0.c). In that case, it would be more complicated, and as my experience, here are the steps I often do:

1. Export the configuration from the variant which I want to keep to .epc files

2. Emove all of the modules and the .xdm files

3. Re-add all of the modules

4. Import the .epc files from step 1.

Best Regards,

Nam

Re: Remove s32K146 variant handle from a module

namnguyenviet — Fri, 14 Jan 2022 07:27:01 GMT

Or you can try to disable the EcuCPostBuildVariant:

Best Regards,

Nam