topic Re: FreeMASTER communication method question (S32K144W) in S32K

FreeMASTER communication method question (S32K144W)

SW_Park — Fri, 24 Dec 2021 08:51:45 GMT

Please check if FreeMASTER communication is possible with JTAG (Multilink) instead of UART.
1) Can I connect with the settings below?
I haven't created a board yet, so I can't confirm it.
2) There is no JTAG setting macro in the software, what should I do?

Re: FreeMASTER communication method question (S32K144W)

ArchieLuo — Sun, 26 Dec 2021 05:57:54 GMT

If you are using PeMicro Multilink.

Re: FreeMASTER communication method question (S32K144W)

SW_Park — Sun, 26 Dec 2021 14:25:48 GMT

Thank you for answer.

I will use JTAG debug port instead of UART port, is SWD mode correct?

And how do I select options in the source?

Re: FreeMASTER communication method question (S32K144W)

Robin_Shen — Mon, 27 Dec 2021 01:48:01 GMT

Hi Sangwoo,

Please refer:
Tools->Connection Wizard...

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: FreeMASTER communication method question (S32K144W)

SW_Park — Mon, 27 Dec 2021 04:46:14 GMT

So, is it not necessary to change the separate macro option?

Re: FreeMASTER communication method question (S32K144W)

Robin_Shen — Tue, 28 Dec 2021 03:20:21 GMT

It is not necessary to change the separate macro option.