Model based design toolbox (missing libraries for S32K3)

kamalwolly — Wed, 22 Dec 2021 18:00:46 GMT

As the Subject heading says I'm interested in the using particular libraries from the model based design tool box for motor control, particularly interested PWM generation, complementary PWM's and dead time insertion , after looking at the documentation below I reckon I can achieve what I'm looking for although its for s32k144. since I have the MDT tool box I went ahead to search for the block FTM Three phase PWM Output Block in my library which is page 69 on the document below. It's not available. is this an installation mistake on my end or those tools are not available for S32344

extension://gphandlahdpffmccakmbngmbjnjiiahp/https://community.nxp.com/pwmxy87654/attachments/pwmxy87654/mbdt/1476/1/Model_Based_Design_Toolbox_Manual_S32K14.pdf

regards,

Kamal

Re: Model based design toolbox (missing libraries for S32K3)

Robin_Shen — Thu, 23 Dec 2021 01:11:04 GMT

Hi Kamal,

Please download the Automotive SW - S32K3 - Model-Based Design Toolbox from S32K3 Standard Software .

The MBDTs support is currently provided through the community only:
https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/bd-p/mbdt

Can you please post it there?
The community is monitored daily by experts on the MBDTs.

Thank you for your understanding.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Model based design toolbox (missing libraries for S32K3) in S32K

Model based design toolbox (missing libraries for S32K3)

Re: Model based design toolbox (missing libraries for S32K3)