topic Re: LDF LIN stack generate lin cfg code miss in S32K

LDF LIN stack generate lin cfg code miss

liuxing_hu — Wed, 25 Aug 2021 01:36:25 GMT

as the picture show, there are 2 slave frames(LIN_Slave_SWSR_SWIT and LIN_Slave_SWSL_SWIT) in LDF file, but when reload LDF file， and generate, only the code of LIN_Slave_SWSL_SWIT generate in lin_cfg.h, I can'r find the code of LIN_Slave_SWSR_SWIT in lin_cfg.h, does I miss something to config?

Re: LDF LIN stack generate lin cfg code miss

hungnguyenphi — Thu, 26 Aug 2021 08:59:05 GMT

Hello @liuxing_hu ,

One interface in the MCU will represent just one node in the Lin Network which is described in the LDF file. Then the LinStack just generated the code for the corresponding node.

Best regards,

Hung

Re: LDF LIN stack generate lin cfg code miss

gaowei — Wed, 08 Dec 2021 01:18:05 GMT

我的S32DS 出现lin ldf文件不能用通过Generated方式输出内容到lin_cfg.c 和.H. ；lin_cfg.c文件中内容没有ldf的相关内容。请问您觉得可能是哪里出了问题？