FreeMASTER-3.1-S32K144EVB

taotao — Tue, 14 Sep 2021 02:25:06 GMT

在按照S32K144EVB快速入门学习调试S32K144EVB时，按操作进行到第4.2步FreeMASTER JumpStart项目下载时，按操作接好设备，选好端口后在explore the board进行恩智浦半导体下载FreeMASTER JumpStart项目失败，报错为无法从链接打开项目文件'http://www.nxp.com/assets/downloads/data/en/application-software/s32K144EVB_OOBE.pmpx"

Re: FreeMASTER-3.1-S32K144EVB

Robin_Shen — Tue, 14 Sep 2021 03:32:04 GMT

Hi taotao,

Please download the S32K144_EVB_JumpStart_PC and S32K144_EVB_JumpStart_Firmware.

If you don't want to flash program by using S32 Design Studio ARM2.0 IDE, you can copy and paste the S32K144_EVB_JumpStart_Firmware.srec file to the EVB-S32K144 drive.

Then you should be able to connect the board at 115200 baud rate.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic FreeMASTER-3.1-S32K144EVB in S32K

FreeMASTER-3.1-S32K144EVB

Re: FreeMASTER-3.1-S32K144EVB