topic Project import error in S32K

Project import error

Raphael2 — Thu, 01 Jul 2021 13:29:21 GMT

Hello there,

I have problems importing a project.I try to use the Sent receiver on the s32k144 EVB:

https://community.nxp.com/t5/S32K-Knowledge-Base/SENT-receiver-for-S32K118-Design-Studio/ta-p/1127356

and get the following error:

My steps were:

1. copy the Project folder into my workspace

2. And import it (import -> General -> Existing Projects into Workspace -> Finish)

Does anyone know how to fix it?

Best regards

Re: Project import error

Robin_Shen — Fri, 02 Jul 2021 06:54:31 GMT

Please try to import this project by using S32 Design Studio for Arm 2018.R1 – Windows/Linux

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Project import error

Raphael2 — Fri, 02 Jul 2021 08:43:59 GMT

Thank you for your fast answer.

When I import the Project with Arm 2018.R1 it says: Program "gcc" not found in Path.

I know there are some threads about it, but i couldn't find a solution yet.

Did you take any steps before importing the Project?

Best regards

Re: Project import error

Robin_Shen — Fri, 02 Jul 2021 09:01:06 GMT

Copy the path of unzip project.

Import Existing Projects into Workspace.

Paste the path

I have installed S32DS_ARM_v2018.R1_UP11 before, it included S32 SDK S32K1xx RTM 3.0.0.

Re: Project import error

Raphael2 — Wed, 07 Jul 2021 12:49:52 GMT

Ok, I tried several times and there are alot of things happening i do not understand.

I uninstalled s32 DS and installed again with update 11.

I import the file and:

First:

this pops up. (OK)

Second:

(OK)

Third:

(Ja)

Which steps do I have to do now? Because if I debug it now, there are these Errors:

And yes I am new to this board and design studio

Best regards

Re: Project import error

Raphael2 — Wed, 07 Jul 2021 13:26:29 GMT

I accidentally replied to the original post with my errors.

To add this:

I forgot to mention the Generation of the Processor Expert Code, but still those errors appear:

Best regards

Re: Project import error

Robin_Shen — Fri, 09 Jul 2021 04:14:08 GMT

Please try to add Callback Name for DMA and try to modify the DMA0_IRQHandler:

Re: Project import error

Raphael2 — Thu, 15 Jul 2021 11:41:37 GMT

Hi,

thank you very much!

I can build it now.

Best Regards