S32KのトピックRe: Remote failure reply when debug using pemicro

Remote failure reply when debug using pemicro

huangkenny — Thu, 29 Apr 2021 08:40:11 GMT

Hello,

I'm using Multilink Universal FX with firmware Version 10.70 to debug on S32K144 by using S32 Design Studio for ARM Version: 2018.R1 Build id: 180815

Upload code & start successfully, but when I press Suspend,

The debugger Console says:

Remote failure reply: E0040000A5A5A5A50000001004ED00E0A5A5A5A5A5A5A5A5A5A5A5A5B8EAFF1FA5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5B8EAFF1F3DA8010054A8010000000021C06F002038E7FF1F00000002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

After this, the session (at least on GDB side) gets screwed, and I cannot stop/continue or single step, and have to kill it.

Any idea on this error code meaning?

thanks a lot.

Kenny

Re: Remote failure reply when debug using pemicro

jiri_kral — Fri, 30 Apr 2021 12:52:38 GMT

Hi,

you can try update PE Micro plugin - https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-Install-update-from-3rd-party-vendor/ta-p/1101851

Jiri

Re: Remote failure reply when debug using pemicro

huangkenny — Tue, 04 May 2021 02:33:25 GMT

Hi Jiri,

Have tried to upgrade to the latest one but still happened.

GNU ARM PEMicro Interface Debugging Support   4.9.1.202104011728   com.pemicro.debug.gdbjtag.pne.feature.feature.group   P&E Microcomputer Systems Inc.
PEmicro ARM Device Expansion Plugin   4.9.1.202104011728   com.pemicro.debug.gdbjtag.pne.expansion.feature.feature.group   P&E Microcomputer Systems Inc.

Thanks,

Kenny

Re: Remote failure reply when debug using pemicro

jiri_kral — Tue, 04 May 2021 07:32:08 GMT

Hi Kenny,

it is possible share your project or at least the .elf file?

Jiri

Re: Remote failure reply when debug using pemicro

huangkenny — Tue, 04 May 2021 07:44:59 GMT

Hi Jiri,

I send elf file in a private message to you, thanks.

Kenny

Re: Remote failure reply when debug using pemicro

jiri_kral — Tue, 04 May 2021 12:42:22 GMT

Hi Kenny,

thanks for sharing .elf file. I tried it and on my side it works. Are you using default programming algorithm?

Can you please share full output from pegdbserver_console? Are you using NXP EVB or custom board?

Jiri

Re: Remote failure reply when debug using pemicro

huangkenny — Wed, 05 May 2021 09:32:17 GMT

Hi Jiri,

I'm using a customized board with S32K144.

The default algorithm is using.

Full logs:

GNU gdb (GNU Tools for ARM Embedded Processors) 7.8.0.20150604-cvs
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "--host=i686-w64-mingw32 --target=arm-none-eabi".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".

monitor preserve0 1 0 65535
monitor selectcore 0
Warning: the current language does not match this frame.
continue
Continuing.

Temporary breakpoint 1, main () at ../Sources/main.c:57
57 PEX_RTOS_START(); /* Startup of the selected RTOS. Macro is defined by the RTOS component. */

Program received signal SIGINT, Interrupt.
[Switching to Thread 536864600]
0x000216e0 in INT_SYS_DisableIRQGlobal () at ../SDK/platform/drivers/src/interrupt/interrupt_manager.c:246
246 }
Remote failure reply: E0040000A5A5A5A50000001004ED00E0A5A5A5A5A5A5A5A5A5A5A5A5B8EAFF1FA5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5B8EAFF1FADA70100C4A7010000000021c06f0020B8EAFF1F0100000200000000000089c30000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000006f12833a0000803f0000003f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Re: Remote failure reply when debug using pemicro

jiri_kral — Thu, 06 May 2021 13:37:54 GMT

Hi Kenny,

what happends if you turn-off the memory preservation?

Jiri