https://community.nxp.com/t5/S32K/Connect-device-on-NxpOpenBus/m-p/1258708#M10482 <P>Hi,</P> <P>you cannot connect RS-232 to LIN directly, you need some LIN interface. And as the tool is based on PEAK you should have e.g. PLIN-USB.<BR />Also you need to power board by 12V so LIN transceiver is powered on the EVB.</P> <P>BR, Petr</P> Thu, 08 Apr 2021 08:31:23 GMT PetrS 2021-04-08T08:31:23Z https://community.nxp.com/t5/S32K/Connect-device-on-NxpOpenBus/m-p/1258262#M10474 <P>I want to use the unified bootloader framework to flash my S32K116 through LIN, I was told to use NxpOpenBus.</P><P>I just downloaded NxpOpenBus I want to use the ISO-LIN-UDS-TOOL but I can not connect my device. I keep receiving "Error-8".</P><P><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HayZam_0-1617826648586.png" style="width: 400px;"><img src="https://community.nxp.com/t5/image/serverpage/image-id/141530i488FEE3EBFEC6C45/image-size/medium?v=v2&amp;px=400" role="button" title="HayZam_0-1617826648586.png" alt="HayZam_0-1617826648586.png" /></span></P><P>I am trying to connect my EVB to my computer with a <SPAN class="uiOutputText">general USB to serial RS-232 cable, I am only&nbsp; connecting the pin 7 (LIN) and pin 3 (GND) from RS-232 to the LIN </SPAN><SPAN class="uiOutputText">and GND pins </SPAN><SPAN class="uiOutputText">of my EVB.</SPAN><SPAN class="uiOutputText"><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="EVB_Connection4OpenBus.png" style="width: 816px;"><img src="https://community.nxp.com/t5/image/serverpage/image-id/141532i142EB3F9D751669E/image-size/large?v=v2&amp;px=999" role="button" title="EVB_Connection4OpenBus.png" alt="EVB_Connection4OpenBus.png" /></span></SPAN></P><P><SPAN class="uiOutputText">I'm configuring my device as shown on the following image:</SPAN><SPAN class="uiOutputText"><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="NXP_OpenBus_error8.PNG" style="width: 999px;"><img src="https://community.nxp.com/t5/image/serverpage/image-id/141531i1E1757FE53229987/image-size/large?v=v2&amp;px=999" role="button" title="NXP_OpenBus_error8.PNG" alt="NXP_OpenBus_error8.PNG" /></span></SPAN></P><P><SPAN class="uiOutputText">Am I connecting or configuring it wrong? Is there any other configuration I should do to be able to connect my device?</SPAN></P> Wed, 07 Apr 2021 20:24:19 GMT https://community.nxp.com/t5/S32K/Connect-device-on-NxpOpenBus/m-p/1258262#M10474 HayZam 2021-04-07T20:24:19Z https://community.nxp.com/t5/S32K/Connect-device-on-NxpOpenBus/m-p/1258708#M10482 <P>Hi,</P> <P>you cannot connect RS-232 to LIN directly, you need some LIN interface. And as the tool is based on PEAK you should have e.g. PLIN-USB.<BR />Also you need to power board by 12V so LIN transceiver is powered on the EVB.</P> <P>BR, Petr</P> Thu, 08 Apr 2021 08:31:23 GMT https://community.nxp.com/t5/S32K/Connect-device-on-NxpOpenBus/m-p/1258708#M10482 PetrS 2021-04-08T08:31:23Z