S32GのトピックRe: How to add IVT header via IVT Tools correctly

How to add IVT header via IVT Tools correctly

LIU_HAO — Mon, 22 Jul 2024 10:42:55 GMT

Hi NXP team,

I am learning <S32G: M kernel Standby demo and how to porting to Mcal> .

I have some problems when adding IVT header for main.bin via IVT TOOLS. I followed the instructions in the document and got the blob.bin file. Then I download the blob.bin in flash via s32 flashtool. The program didn't run when I powered S32G on.

Please tell me what is the reason of the program does not run and how to add IVT header correctly.

Re: How to add IVT header via IVT Tools correctly

Daniel-Aguirre — Mon, 22 Jul 2024 15:00:46 GMT

Hi,

Can you let us know which S32G product are you using? Also, are you using any NXP reference board?

Please, let us know.

Re: How to add IVT header via IVT Tools correctly

LIU_HAO — Mon, 22 Jul 2024 15:18:14 GMT

Hi ,

Thanks for your response.

My device is S32G-VNP-RDB2.

Re: How to add IVT header via IVT Tools correctly

Daniel-Aguirre — Mon, 22 Jul 2024 16:45:56 GMT

Hi,

Thanks for your feedback.

On regards of IVT creation, we can recommend looking into the RDB2 Software Enablement Guide available under the S32G2 product page (link: S32G2 Vehicle Networking Reference Design | NXP Semiconductors), given that it provides a Software example as well as the IVT creation and flashing to the corresponding boot interface.

Please, let us know.