S32GのトピックRe: libfci_cli commands description document for SDK BSP41 pfeng v1.7.0

libfci_cli commands description document for SDK BSP41 pfeng v1.7.0

hittzt — Mon, 15 Jul 2024 03:07:25 GMT

Hi,

Recently, I tested pfe feature based on SDK BSP41, and I found that the pfe driver updated its codes to v1.7.0 and the log_if is not used as previous, but I can not find the related fci commands description.

So would you please help to tell where can get the files or documents?

Thanks,

Zhantao

Re: libfci_cli commands description document for SDK BSP41 pfeng v1.7.0

Daniel-Aguirre — Mon, 15 Jul 2024 14:14:13 GMT

Hi,

Can you let us know which S32G variant you are using?

Please, let us know.

Re: libfci_cli commands description document for SDK BSP41 pfeng v1.7.0

hittzt — Tue, 16 Jul 2024 06:13:31 GMT

Hi,

I used RDB3 v1.1 SOC for test, and I followed the doc: "PFE_S32G_A53_LNX_UserManual.pdf", which is from the previous pfe branch, like v1.4.0, but now these .pdf files are all removed from the v1.7.0 branch.

Thanks,

Zhantao

Re: libfci_cli commands description document for SDK BSP41 pfeng v1.7.0

Daniel-Aguirre — Tue, 16 Jul 2024 14:51:47 GMT

Hi,

Seems to be that this community thread and the following might contain the same information:

Re: pfe slave test steps based on BSP41 - NXP Community

Is there a problem if we continue in the above community thread? Or would you like for us to mirror the information to this thread?

Please, let us know.