https://community.nxp.com/t5/S32G/RTD-MCU/m-p/1815372#M6030 <P>hello，<SPAN>I would like to ask if there are any configuration items related to memory protection in the MCAL configuration of S32G, especially in the MCU module. My project cannot currently access 0x43000000U. Is it possible that this part of the memory has not been enabled? When accessing this address, the project will report a hard fault and enter a deadlock. Below is the debugging record.</SPAN></P> Mon, 26 Feb 2024 08:44:49 GMT peko 2024-02-26T08:44:49Z https://community.nxp.com/t5/S32G/RTD-MCU/m-p/1815372#M6030 <P>hello，<SPAN>I would like to ask if there are any configuration items related to memory protection in the MCAL configuration of S32G, especially in the MCU module. My project cannot currently access 0x43000000U. Is it possible that this part of the memory has not been enabled? When accessing this address, the project will report a hard fault and enter a deadlock. Below is the debugging record.</SPAN></P> Mon, 26 Feb 2024 08:44:49 GMT https://community.nxp.com/t5/S32G/RTD-MCU/m-p/1815372#M6030 peko 2024-02-26T08:44:49Z https://community.nxp.com/t5/S32G/RTD-MCU/m-p/1815668#M6041 <P>Hi,</P> <P>It seems that this thread is the same as the following:</P> <P><A href="https://community.nxp.com/t5/S32G/HardFault-Handler/td-p/1815144" target="_blank">HardFault_Handler - NXP Community</A></P> <P>Is this correct?</P> <P>Please, let us know.</P> Mon, 26 Feb 2024 14:37:20 GMT https://community.nxp.com/t5/S32G/RTD-MCU/m-p/1815668#M6041 Daniel-Aguirre 2024-02-26T14:37:20Z