topic Re: llce_loopback project load configuration success but the modules all disable in S32G

llce_loopback project load configuration success but the modules all disable

mmoi — Tue, 28 Nov 2023 06:10:05 GMT

After installing EB tresos AutoCore, I was able to import the goldvip gateway project normally and the loading configuration was normal without any exceptions. However, when I imported the can loopback project in llce 1.0.5, there was no error in loading the configuration as shown in Figure 1. However, all modules in the project were grayed out and disabled as shown in Figure 2. After enabling the module by right clicking, an error was reported as shown in Figure 3

figure 1

figure 2

figure 3

How can I solve this problem so that I can configure the can loopback project?

Re: llce_loopback project load configuration success but the modules all disable

Daniel-Aguirre — Tue, 28 Nov 2023 16:55:16 GMT

Hi,

We understand that the GoldVIP project requires modifications to the plugins of EB Tresos (adding and modifying plugins). LLCE examples for EB Tresos seem to have problems with these modifications, hence they are not able to be imported if GoldVIP project has been imported previously.

We can recommend either creating a new environment for the required plugins without modifications, or reinstalling EB Tresos to reset the plugins.

We do apologize for the inconvenience.

Please, let us know.

Re: llce_loopback project load configuration success but the modules all disable

mmoi — Wed, 29 Nov 2023 01:20:24 GMT

Thank you for your reply. I have reinstalled eb29.0 and can load the can loopback project configuration normally. The goldvip gateway project still uses eb29.2 for configuration