S32G中的主题 Re: update code from CLI S32DS

update code from CLI S32DS

cristianchacha — Tue, 17 Oct 2023 10:16:58 GMT

Hello I'm working with S32 Design Studio

My goal is build a project with CLI, actually I achieved import and build. Also I would like to update this code with a *.hex file.
I'm using SDK SJA1110, and I can update the code manually , using option load table from configuration file (in switchcore ), selecting file and push load button, after that I click in Updated code and generate code is updated.

Is possible realize these steps with CLI?.

Re: update code from CLI S32DS

Mehul_Patel_NXP — Fri, 27 Oct 2023 20:04:10 GMT

Hi, @cristianchacha ,

Please can you check this guide for reference guide

HOWTO: S32 Design Studio Command Line Interface: https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-S32-Design-Studio-Command-Line-Interface/ta-p/1112410

Also you can use this as reference guide to understand although the guide is not for SJA1110

HOWTO: Command Line JTAG flash programming with S32 Debug Probe on S32G274A EVB

https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-Command-Line-JTAG-flash-programming-with-S32-Debug-Probe/ta-p/1102702

Please let us know if you have further question or specific requirement to SJA110 or related to the project.

Thank you. Best regards.

-Mehul Patel

Please let us know if

Re: update code from CLI S32DS

cristianchacha — Mon, 30 Oct 2023 07:05:21 GMT

Hello Mehul,

I reviewed HOWTO: S32 Design Studio Command Line Interface I found how to build, but my goal is import a hexfile to generate code and also buil the project.

Do you know is this feature is cover with CLI ??

Re: update code from CLI S32DS

Mehul_Patel_NXP — Mon, 30 Oct 2023 17:03:00 GMT

Hi, @cristianchacha ,

I am not sure about hex file, but you can use .elf file for sure.

Please can you check this post if it helps: https://community.nxp.com/t5/S32-Design-Studio/s32k144-command-line-flash/m-p/805235

Please let us know if you are able to work forward.

Thank you.

Best regards.

- Mehul Patel