Cannot Open the IVT Panel in S32DS When Trying to Generate Boot Image for S32G3

lihongjun — Fri, 20 Oct 2023 07:20:06 GMT

Dear NXP,

I am trying to generate a boot image for S32G3 using IVT_TOOL of S32DS3.5, according to the steps introduced by AN13750.

I created the S32G3_IVT project, the selected core is Cortex-M7(core #4). The steps are as follow:

Step1

Step2

Step3 After Open IVT:

But after the project has been created, I open IVT view, the IVT tool cannot be open to set boot target, boot device etc., as shown below:

While other tools, such as DCD, QSPI and DDR can be open.

Please tell me if this is normal or I should modify the project config again?

Thank you.

Re: Cannot Open the IVT Panel in S32DS When Trying to Generate Boot Image for S32G3

Daniel-Aguirre — Fri, 20 Oct 2023 17:36:59 GMT

Hi,

Can you share a capture of the behavior you are seeing? The capture you have shared is the enablement of the IVT, but not the IVT window (or the lack of it).

Could be related to the following thread:

S32DS IVT show nothing - NXP Community

Please, let us know.

topic Cannot Open the IVT Panel in S32DS When Trying to Generate Boot Image for S32G3 in S32G

Cannot Open the IVT Panel in S32DS When Trying to Generate Boot Image for S32G3

Re: Cannot Open the IVT Panel in S32DS When Trying to Generate Boot Image for S32G3