topic Re: S32G LLCE build 1.0.5QLP1 example pfe failed in S32G

S32G LLCE build 1.0.5QLP1 example pfe failed

hebi — Wed, 20 Sep 2023 03:58:34 GMT

Hello,

I installed the routine of S32G LLCE 1.0.5QLP1 according to the AN13423, LLCE_AF can compile successfully, but LLCE_PFE routine cannot be compiled successfully. I tried comparing the makeflie file of 1.0.4 and found that there is no difference, while 1.0.4 compiles successfully, so is there anything different about debugging the PFE routine of 1.0.5QLP1?

The following figure shows the error message of compiling the PFE routine of version 1.0.5QLP1

Re: S32G LLCE build 1.0.5QLP1 example pfe failed

nxf92355 — Fri, 22 Sep 2023 09:22:42 GMT

Hi 锦荣何

Hope you are doing well

are you seeing such file tmp/Llce_Firmware_load.o ? and can you tell us which compiler you are using ?

Regards ,

Tushar

Re: S32G LLCE build 1.0.5QLP1 example pfe failed

hebi — Sun, 08 Oct 2023 09:43:39 GMT

Hi Tushar

thanks for your reply .

The project cannot generate the tmp folder, I am using the GCC cross-compiler, the specific information is shown in the figure. In addition, the project under the llce_sample_app_af can be compiled successfully.

regards，

锦荣，HE

Re: S32G LLCE build 1.0.5QLP1 example pfe failed

nxf92355 — Mon, 09 Oct 2023 12:17:49 GMT

Hi 锦荣何

I was trying to regenerate issue. I am getting tmp folder generated. can you check with the prerequisites as below

- S32_RTD_4.4.4.0.0_D2211

- S32G_LLCE_GATEWAY_4.4_1.0.5_D2212

- PFE RTD 1.0.0

Can you try to compile via command line at the location of example C:\NXP\S32G_LLCE_1_0_5_QLP1\sample_app_llce\llce_sample_app_pfe\ and rum make command.

Regards ,

Tushar