S32G274A: When the master is eDMA, XRDC cannot capture the error address

Kojimaa — Mon, 04 Sep 2023 08:13:47 GMT

Hi NXP:

I am testing with XRDC module. When I used eDMA_0 as the master to access the wrong peripheral, a bus error was triggered. But when I read the error information registers, XRDC did not capture the error address in DERR_Wx_y register. But can locate the peripheral group where the error occurred in DERRLOCx register. As shown in the following figures, Is this normal?

Thanks

Re: S32G274A: When the master is eDMA, XRDC cannot capture the error address

Kojimaa — Mon, 04 Sep 2023 08:28:59 GMT

Not only peripherals, but also memory access still cannot be captured.

topic S32G274A: When the master is eDMA, XRDC cannot capture the error address in S32G

S32G274A: When the master is eDMA, XRDC cannot capture the error address

Re: S32G274A: When the master is eDMA, XRDC cannot capture the error address