S32GのトピックRe: S32G IPCF runs in an endless loop

S32G IPCF runs in an endless loop

jack_huang1 — Wed, 28 Jun 2023 06:23:19 GMT

Dear,

The S32G2 platform is based on IPCF4.8.0.

Q1: After the configuration is interrupted 19, the program keeps entering the ISR(Ipc_Hard_irq_handle) function after running. See Appendix 1 for the implementation of the function.

Q2: IPCF reverted to version 4.6.0 with an unhandleirq error, and then IPCF changed from 4.6.0 to 4.8.0 with the same error screenshot as attached 2.

Thank you!

Best Regards!

Re: S32G IPCF runs in an endless loop

nxf92355 — Fri, 30 Jun 2023 05:55:16 GMT

Hi Jack

Hope you are doing well

Can you some brief on "After the configuration is interrupted 19" ?

Can you tell which document you are talking "Appendix 1 for the implementation of the function" ?

Regards ,

Tushar

Re: S32G IPCF runs in an endless loop

jack_huang1 — Sat, 01 Jul 2023 15:11:05 GMT

Dear Tushar:

It's solved now, because our system versions don't match it.

Thank you!

Best Regards!