S32GのトピックHow to apply the S32G Real-Time Driver (RTD) on Linux bsp.

How to apply the S32G Real-Time Driver (RTD) on Linux bsp.

ljy — Thu, 13 Jan 2022 05:08:10 GMT

I used the document "S32G-VNP-RDB2 REAL TIME DRIVER EXAMPLE ENABLEMENT GUIDE" to proceed from S32DS to elf file creation.

However, I couldn't find a way to apply the generated result in linux bsp.

I'd like some help on how to apply the result.

Re: How to apply the S32G Real-Time Driver (RTD) on Linux bsp.

bpe — Thu, 13 Jan 2022 08:34:29 GMT

Real Time Drivers are essentially for bare hardware and M7 core. There is no
way to use them in Linux environment.

Best Regards,
Platon

Re: How to apply the S32G Real-Time Driver (RTD) on Linux bsp.

ljy — Thu, 13 Jan 2022 09:16:13 GMT

Dear NXP.

I want to use my A53 and M7 core at the same time.

I want to operate Linux os for A53 and RTOS for M7 and communicate through IPCF.

In order to do as above, Linux bsp and RTOS image should be stored together on SD card or eMMC memory, but I don't know what to do.

I need a guide document. Please help me.

Re: How to apply the S32G Real-Time Driver (RTD) on Linux bsp.

bpe — Wed, 19 Jan 2022 11:17:12 GMT

See NXP Technical Support answer in this thread.

Best Regards,
Platon