S32GのトピックHow to enable bootloader debugger project with ds IDE ?

How to enable bootloader debugger project with ds IDE ?

fengxianeric — Thu, 29 Jun 2023 08:57:52 GMT

Hi, I build bootloader by command and tresos, but how to use ds to establish such project as doc mentioned below ?

Thanks

Re: How to enable bootloader debugger project with ds IDE ?

Daniel-Aguirre — Thu, 29 Jun 2023 18:36:29 GMT

Hi,

The following HOWTO tells the steps to be able to debug a blob image loaded to NOR Flash:

HOWTO: JTAG Flash Programming with S32 Debugger an... - NXP Community

We recommend starting from an easier project, like a blink, to understand the process to be able to debug from external flash.

Please, let us know.

Re: How to enable bootloader debugger project with ds IDE ?

fengxianeric — Thu, 29 Jun 2023 23:58:13 GMT

Thanks caring.

Yes I know how to do programming.

and how to connect debugger.

My point is how to build Ds boot loader project because I did by eb project plus make according doc guide.

Thanks again

Re: How to enable bootloader debugger project with ds IDE ?

Daniel-Aguirre — Fri, 30 Jun 2023 15:44:50 GMT

Hi,

Thanks for your feedback.

At this moment, there is no bootloader project available under S32DS. The image you shared was a debugging session under S32DS, hence we shared on how to debug under S32DS. We apologize.

Please, let us know.