S32GのトピックRe: Linux BSP Boot https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1657627#M3375 <P>&nbsp;</P><P><SPAN>Hi,</SPAN></P><P>We built a yocto Linux BSP 33.0 image and tried to boot a s32g274ardb2 board using a sd card. But we encountered only these logs are been generated&nbsp; during bootup. Please refer the log below and tell us how to rectify it. Thanks in advance.</P><DIV class="">NOTICE: &nbsp;Reset status: Power-On Reset &nbsp;</DIV><DIV class="">NOTICE: &nbsp;BL2: v2.5(release):bsp33.0.hf1-2.5-dirty</DIV><DIV class="">NOTICE: &nbsp;BL2: Built : 13:14:01, Aug 11 2022</DIV><DIV class="">NOTICE: &nbsp;BL2: Booting BL31 &nbsp;<SPAN>&nbsp;</SPAN></DIV> Thu, 25 May 2023 10:50:31 GMT Sri_5600 2023-05-25T10:50:31Z Linux BSP Boot https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1546355#M1614 <P><SPAN>Hi,</SPAN></P><P>We built a yocto Linux BSP 33.0 image and tried to boot a s32g274ardb2 board using a sd card. But we encountered the following error during bootup. Please refer the log below and tell us how to rectify it. Thanks in advance.</P><P><SPAN>Welcome to minicom 2.7.1</SPAN></P><DIV>&nbsp;</DIV><DIV class="">OPTIONS: I18n</DIV><DIV class="">Compiled on Aug 13 2017, 15:25:34.</DIV><DIV class="">Port /dev/ttyUSB0, 19:46:59</DIV><DIV>&nbsp;</DIV><DIV class="">Press CTRL-A Z for help on special keys</DIV><DIV>&nbsp;</DIV><DIV class="">NOTICE: &nbsp;Reset status: Power-On Reset &nbsp;</DIV><DIV class="">NOTICE: &nbsp;BL2: v2.5(release):bsp32.0-2.5-dirty</DIV><DIV class="">NOTICE: &nbsp;BL2: Built : 16:14:01, Mar 18 2022</DIV><DIV class="">NOTICE: &nbsp;BL2: Booting BL31 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">U-Boot 2020.04+g7cc85e1885 (Mar 21 2022 - 08:09:34 +0000)</DIV><DIV class="">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">CPU: &nbsp; NXP S32G274A rev. 2.1.0 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Model: NXP S32G274A-RDB2 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">DRAM: &nbsp;3.5 GiB &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">MMC: &nbsp; FSL_SDHC: 0</DIV><DIV class="">Loading Environment from MMC... *** Warning - bad CRC, using default environment</DIV><DIV>&nbsp;</DIV><DIV class="">Using external clock for PCIe0, CRNS &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Configuring PCIe0 as RootComplex(x2) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Using external clock for PCIe1, CRNS &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Frequency 125Mhz configured for PCIe1 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Configuring PCIe1 as SGMII(x2) [XPCS0 2.5G, XPCS1 OFF] &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">PCIe0: Failed to get link up &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Pcie0: LINK_DBG_1: 0x00000000, LINK_DBG_2: 0x00000800 (expected 0x000000d1) &nbsp; &nbsp;</DIV><DIV class="">DEBUG_R0: 0x00233e01, DEBUG_R1: 0x08600000 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">PCI: Failed autoconfig bar 20 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">PCI: Failed autoconfig bar 24 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">PCIe1: Not configuring PCIe, PHY not configured &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">In: &nbsp; &nbsp;serial@401C8000 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Out: &nbsp; serial@401C8000 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Err: &nbsp; serial@401C8000 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Board revision: RDB2/GLDBOX Revision D &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Net: &nbsp; EQOS phy: rgmii @ 1 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Warning: eth_eqos (eth0) using random MAC address - c6:ed:6a:84:bc:ff &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">eth0: eth_eqos PFE: emac0: sgmii emac1: none emac2: rgmii &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">** Unrecognized filesystem type ** &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">PFEng firmware file 'mmc@0:1:s32g_pfe_class.fw' loading failed: -1 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Hit any key to stop autoboot: &nbsp;0 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">** Invalid partition 2 ** &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">## Executing script at 80200000 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Wrong image format for "source" command &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">No FDT memory address configured. Please configure &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">the FDT address via "fdt addr &lt;address&gt;" command. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Aborting! &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">No FDT memory address configured. Please configure &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">the FDT address via "fdt addr &lt;address&gt;" command. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Aborting! &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</DIV><DIV class="">Bad Linux ARM64 Image magic! &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<SPAN>&nbsp;</SPAN></DIV> Mon, 31 Oct 2022 14:30:54 GMT https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1546355#M1614 akhil_k_appu 2022-10-31T14:30:54Z Re: Linux BSP Boot https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1547225#M1622 <P>Hi,</P> <P>For what you are showing in the log, there is CRC error on the image. Have you followed the S32 Linux User guide? The guide should give you, step by step, the tools for you to create a linux image for the S32G2 platform. You can find this guide under the Linux BSP for S32. Below will be a link redirecting to this page.</P> <P><A href="https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/bsp-for-s32-microcontrollers-and-processors:BSP-S32" target="_blank">BSP for S32 MCUs and Processors | NXP Semiconductors</A></P> <P>Under the "Automotive SW for S32G2 – Linux BSP" option, you should be able to access this information.</P> <P>Please, let us know if this information was helpful or not.</P> Tue, 01 Nov 2022 22:25:04 GMT https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1547225#M1622 Daniel-Aguirre 2022-11-01T22:25:04Z Re: Linux BSP Boot https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1657627#M3375 <P>&nbsp;</P><P><SPAN>Hi,</SPAN></P><P>We built a yocto Linux BSP 33.0 image and tried to boot a s32g274ardb2 board using a sd card. But we encountered only these logs are been generated&nbsp; during bootup. Please refer the log below and tell us how to rectify it. Thanks in advance.</P><DIV class="">NOTICE: &nbsp;Reset status: Power-On Reset &nbsp;</DIV><DIV class="">NOTICE: &nbsp;BL2: v2.5(release):bsp33.0.hf1-2.5-dirty</DIV><DIV class="">NOTICE: &nbsp;BL2: Built : 13:14:01, Aug 11 2022</DIV><DIV class="">NOTICE: &nbsp;BL2: Booting BL31 &nbsp;<SPAN>&nbsp;</SPAN></DIV> Thu, 25 May 2023 10:50:31 GMT https://community.nxp.com/t5/S32G/Linux-BSP-Boot/m-p/1657627#M3375 Sri_5600 2023-05-25T10:50:31Z