topic Re: How to write Startup code in S32G

How to write Startup code

ashish2 — Tue, 21 Feb 2023 11:50:48 GMT

How to write Startup code for S32G274A, m7 core for autosar

Re: How to write Startup code

Daniel-Aguirre — Tue, 21 Feb 2023 17:59:26 GMT

Hi,

Are you using any NXP provided packages for S32G?

There is a startup code provided on the RTD package for S32G2 itself. This can be obtained on the Automotive Software Package Manager located on the Software section on the S32G2 product page (link: S32G2 Safe and Secure Vehicle Network Processor | NXP Semiconductors)

Please, let us know.

Re: How to write Startup code

ashish2 — Wed, 22 Feb 2023 12:54:35 GMT

No, I am using Autosar vector package. I need to run Autosar on NXP controller.

Re: How to write Startup code

Daniel-Aguirre — Wed, 22 Feb 2023 15:25:43 GMT

Hi,

We then could recommend looking into the RTD package available under S32G2 product site (link: S32G2 Safe and Secure Vehicle Network Processor | NXP Semiconductors) in the Automotive Software Package Manager.

As said in the RTD product site:

"Real-Time Drivers (RTD) are a new and innovative drivers set supporting real-time software on AUTOSAR® and non-AUTOSAR applications targeting Arm® Cortex®-M cores and ISO 26262 compliance for all software layers, providing full IP and features".

Please, let us know if this information was helpful or not.

Re: How to write Startup code

ashish2 — Thu, 23 Feb 2023 04:33:27 GMT

thank you, let me try.