S32G中的主题 Re: EB tresos load fail

EB tresos load fail

Niranj_369 — Sat, 04 Oct 2025 04:16:33 GMT

Im following the AN13750 document to build the ipcf package for s32g3. In EB tresos. I have copied the RTD eclypse plugins, imported the integration reference example and loaded the ecuc. but still no files are appearing under the ecuc.

and got the below message after trying to load the configuration.

Re: EB tresos load fail

chenyin_h — Sat, 04 Oct 2025 05:28:05 GMT

Hello, @Niranj_369

Thanks for your post.

May I know which version "integration reference example" selected for S32G3?

Chenyin

Re: EB tresos load fail

Niranj_369 — Sat, 04 Oct 2025 10:15:43 GMT

Thanks @chenyin_h

Im using Platform_Software_Integration_S32G3_2023_02.
note: Im working with s32g3 SOC. The document is for s32g2. I hope it is compatible with s32g3.

Re: EB tresos load fail

chenyin_h — Sun, 05 Oct 2025 13:10:07 GMT

Hello, @Niranj_369

Thanks for your reply.

The AN13750 is based on S32G2, the method is also workable for S32G3, however, since hardware/software version differences, it is not fully compatible with S32G3.

If you are working with Platform_Software_Integration_S32G3_2023_02, then you have to install the packages that list from the release notes of "Platform_Software_Integration_S32G3_2023_02" in advance,(which may not the same as mentioned in AN13750) and then try loading bootloader project to the EB as described by AN13750.

Sorry for your inconvenience.

Chenyin

Re: EB tresos load fail

Niranj_369 — Mon, 06 Oct 2025 18:46:08 GMT

Thanks @chenyin_h

I have fixed the issue by using compatible version of Platform_Software_Integration package.