topic Re: S32G Lauterbach DEBUG in S32G

S32G Lauterbach DEBUG

lion_6 — Fri, 12 Sep 2025 08:28:19 GMT

I have currently burned the bootloader program through the S32Flash Tool by referring to the Integration_Reference_Examples_S32G2_2023_06 SDK and AN13750. However, when loading the CMM using Lauterbach for debugging, the following issue occurred. How can I solve it? It seems that the address is incorrect.

lion_6_0-1757665674938.png

Re: S32G Lauterbach DEBUG

chenyin_h — Fri, 12 Sep 2025 10:45:49 GMT

Hello, @lion_6

Thanks for your post.

May I know if you could continue with the debug by clicking stop button from trace32?

This kind of error print may be seen from attaching operation, but usually not impact the whole debugging work, would you mind testing it again?

Chenyin

Re: S32G Lauterbach DEBUG

lion_6 — Sat, 13 Sep 2025 07:04:20 GMT

At present, debugging cannot be performed. After loading the ELF file, no code information can be seen. It seems that this cmm file has failed to connect the board and the debugger.

lion_6_0-1757747043857.png

Re: S32G Lauterbach DEBUG

chenyin_h — Mon, 15 Sep 2025 02:06:26 GMT

Hello, @lion_6

Thanks for your reply.

The cmm file you referenced is a simple attaching operation, if the binary you flashed to the QSPI could run correctly, then this attach operation could be generally run without issues.

A possible reason is that with the board version, would you mind checking your board version of RDB2/EVB used? The bootloader from Integration_Reference_Examples_S32G2_2023_06 is developed and tested under:

chenyin_h_0-1757901927302.png

If using the newer version board like RDB2REVE, I suggest trying bootloader from GoldVIP1.1x for your reference.

Chenyin