S32G中的主题 Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

NewbieNerd — Fri, 13 Jun 2025 02:53:06 GMT

Hello S32G
I’m working with GoldVIP and trying to follow the User Manual to rebuild the M7 CAN Gateway application. However, while applying patches in the <GoldVIP_install_path>/eenvs/S32G2_M7_Gateway/patches directory, I encountered a problem: the EB tresos ACP environment reports that the "Os" plugin is missing in the plugins/ directory.

Could you please advise on how to resolve this issue? Is there a specific package I need to install to get the missing "Os" plugin, or a recommended source for it?

Thank you in advance.

Best regards,

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

Joey_z — Fri, 13 Jun 2025 04:13:18 GMT

hi,NewbieNerd

Thank you for your reply.

Which version of RTD/EB are you using?

You can try to copy the Os_TS_T files in RTD to the C:\EB\tresos\plugins directory in EB.

Hope it can help you.

Joey

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

NewbieNerd — Mon, 16 Jun 2025 08:11:02 GMT

Thank you for your response.

Based on your reply and the user manual, I was able to install the necessary components and successfully generate the code in EB tresos.

However, when I proceeded to build the project, I encountered a build error. I would like to ask where I should report or inquire about such build issues.

For your reference, I am using the GHS (Green Hills Software) compiler.

Best regards,

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

Joey_z — Mon, 16 Jun 2025 10:05:36 GMT

hi，NewbieNerd

Thank you for your reply.

You can try to use the GCC compiler, and to check whether you have the same issues.

Joey

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

NewbieNerd — Tue, 17 Jun 2025 00:29:23 GMT

Thank you again for your response.

As you suggested, I tried building the project using the GCC compiler instead of GHS. This resolved the semaphore-related error. However, I’m still encountering a usize-related error during the build process.

I’ve attached a screenshot of the error for your reference.

Could you please advise on how to resolve this issue?

Best regards,

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

Joey_z — Tue, 17 Jun 2025 02:56:12 GMT

hi，NewbieNerd

Thank you for your reply.

Which the version of RDT are you using? And where are you find the package of Base_TS_TxDxM5I2R0?

You should refer to the manual and use the RTD compatible with goldvip.

Joey

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

NewbieNerd — Tue, 17 Jun 2025 03:04:58 GMT

Thank you for your continued support.

I confirm that I used the RTD version specified in the manual.
For your reference, I’ve attached the page from the user manual that lists the required version.

Thanks again for your assistance.

Also, I noticed that the Base_TX module was already available after installing EB tresos ACP.

Best regards,

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

Joey_z — Wed, 18 Jun 2025 07:31:24 GMT

hi，NewbieNerd

Thank you for your reply and information.

Where you find the package of Base_TS_TxDxM5I2R0, it seems that it is not very applicable.

Joey

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

NewbieNerd — Wed, 18 Jun 2025 08:03:37 GMT

Thank you very much for your kind response and support.

Just to clarify, I did not install the Base_TS_TxDxM5I2R0 package separately.
I only installed EB tresos version 27.1.0 and ACP 8.8.7 for S32G27x, and the package was included by default.

Please let me know if a different version is required.

Best regards,

Re: Issue GoldVIP M7 Application - Missing Os Plugin in EB tresos

Joey_z — Fri, 20 Jun 2025 06:59:34 GMT

hi，NewbieNerd

Thank you for you reply.

Your ACP 8.8.7 is normal. You can refer to the User-Manual.pdf to check the complier version and plugins.

Hope it can help you.

Joey