S32GのトピックRe: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

MohamedAbdelslam — Mon, 14 Oct 2024 12:50:32 GMT

Hi all,
I am working on S32G399A-RDB3 board and i am trying the sample example IPCF_FreeRTOS-S32G399A-M7-0, but on the other side I want to know how to install the IPCF component on the linux image on core A53? If there is example or a guide demonstrate that

Re: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

chenyin_h — Tue, 15 Oct 2024 03:30:27 GMT

Hello, @MohamedAbdelslam

Thanks for your post.

May I know which version IPCF you are working with? also the BSP version?

The Linux side would be included in the default BSP images, but may be incompatible with the version you used from M core side.(the two sides of M&A should be with the same version)

The IPCF Linux side could be also built manually according to your M core version used, it could be built and used as a common Linux module, which could be accessed from the following path:

https://github.com/nxp-auto-linux/ipc-shm

Hope it helps.

Chenyin

Re: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

MohamedAbdelslam — Tue, 15 Oct 2024 09:12:03 GMT

Hello @chenyin_h

On M core
IPCF version : 4.10.0
On A core
BSP version : 41
IPCF: 0.1
I have a problem with connecting the borad via IP after executing the commands:
root@s32g399ardb3:~# insmod /lib/modules/5.15.153-rt75+gadceb7e8fa72/extra/ipc-shm-dev.ko
root@s32g399ardb3:~# insmod /lib/modules/5.15.153-rt75+gadceb7e8fa72/extra/ipc-shm-sample.ko
client_loop: send disconnect: Broken pipe
after those commands we cannot connect to the board and we must restart it manually

Re: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

chenyin_h — Wed, 16 Oct 2024 02:02:00 GMT

Hi, @MohamedAbdelslam

Thanks for your reply.

I understand that the remote login disconnected after inserting the modules?(maybe you were testing it via a ssh connection?)

May I know if you have tested directly with board via the UART? what is the log after loading the IPCF modules?

Chenyin

Re: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

MohamedAbdelslam — Wed, 16 Oct 2024 09:29:23 GMT

@chenyin_h The same behavior happens. I don't know why it connect once and after exit we cannot connect again

Re: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

MohamedAbdelslam — Wed, 16 Oct 2024 12:59:17 GMT

Hi, @chenyin_h
Thanks a lot, the problem is solved, and it was due to insufficient memory space

Re: S323G3-A53 Core- Linux Image - How to install IPCF on Linux image?

chenyin_h — Thu, 17 Oct 2024 03:18:41 GMT

Hello, @MohamedAbdelslam

Glad to hear that the issue is resolved, if any other issue met, welcome to raise new post here, we are happy to support.

Chenyin