https://community.nxp.com/t5/Power-Management/BAW56SRAZ-diode/m-p/2194735#M4759 <P>Hi</P> <P><A id="lnkManufacturerName" href="https://www.mouser.com/manufacturer/nexperia/" data-testid="ProductInfoMfrName" target="_blank"><SPAN>BAW56SRAZ is&nbsp;</SPAN>Nexperia part&nbsp; not NXP part!</A></P> <P>Please contact with support of Nexperia.</P> Wed, 29 Oct 2025 03:14:35 GMT guoweisun 2025-10-29T03:14:35Z https://community.nxp.com/t5/Power-Management/BAW56SRAZ-diode/m-p/2194486#M4758 <P>Hey folks,</P><P>I’m building an analog signal-chain for a sensor interface and I’m trying to integrate the <A href="https://www.kasuo.com/product/baw56sraz-datasheet-price-pdf-nxp-semiconductors/" target="_self">BAW56SRAZ switching diode</A>. It’s a dual diode on a tiny chip, perfect for signal routing/switching.</P><P>When I toggle the signal path, I’m seeing weird voltage drops. I’m not sure if the diode is mis-wired or if it’s just not the right part for this kind of low-voltage analog routing. My layout uses long traces and shares the ground plane with a high-speed MCU, could that be messing with the diode’s performance?</P><P>Has anyone used the BAW56SRAZ in a sensor or analog routing project? I’d value your thoughts on diode routing, signal trace length, or alternatives that handled clean analog switching better.</P><P>Thanks for the help, really appreciate the community!</P> Tue, 28 Oct 2025 18:29:49 GMT https://community.nxp.com/t5/Power-Management/BAW56SRAZ-diode/m-p/2194486#M4758 Jordan1x 2025-10-28T18:29:49Z https://community.nxp.com/t5/Power-Management/BAW56SRAZ-diode/m-p/2194735#M4759 <P>Hi</P> <P><A id="lnkManufacturerName" href="https://www.mouser.com/manufacturer/nexperia/" data-testid="ProductInfoMfrName" target="_blank"><SPAN>BAW56SRAZ is&nbsp;</SPAN>Nexperia part&nbsp; not NXP part!</A></P> <P>Please contact with support of Nexperia.</P> Wed, 29 Oct 2025 03:14:35 GMT https://community.nxp.com/t5/Power-Management/BAW56SRAZ-diode/m-p/2194735#M4759 guoweisun 2025-10-29T03:14:35Z